NT9K Pro Pump Status?

Share your ideas, parts sources and key projects.

Moderators: W5ALT, AC2C

Post Reply
WA2WMR
Member
Posts: 10
Joined: Tue Nov 27, 2007 4:53 pm
Location: Northern Virginia
Contact:

NT9K Pro Pump Status?

Post by WA2WMR » Sun Mar 04, 2012 4:13 pm

I have one of the NT9K Pro Pump keys and absolutely love it. However, in a number of QSOs, when I have mentioned it, the response was that they wanted to get one but couldn't find it anywhere?

The link from SKCC to the producer of the key seems to be gone.

Is this key still being produced? If so, by whom and how does one contact them?

kb4qqj
Member
Posts: 197
Joined: Mon Oct 08, 2007 5:57 pm
Location: Burlington, NC FM06gd
Contact:

Post by kb4qqj » Sun Mar 11, 2012 4:46 pm

Hi WA2WMR,
The NT9K is out of production. There will be no more produced unless someone wants to buy the remaining inventory of parts and pick up where we left off.

73 for now,
Randy_KB4QQJ
http://www.keyconcepts.us/about.html

WA2WMR
Member
Posts: 10
Joined: Tue Nov 27, 2007 4:53 pm
Location: Northern Virginia
Contact:

Re: NT9K Pro Pump Status?

Post by WA2WMR » Thu Mar 15, 2012 7:14 pm

That's sad. It is a magnificient key, both in appearance and in operation.

kb4qqj
Member
Posts: 197
Joined: Mon Oct 08, 2007 5:57 pm
Location: Burlington, NC FM06gd
Contact:

Re: NT9K Pro Pump Status?

Post by kb4qqj » Fri Mar 16, 2012 3:47 am

I agree.
We may do some ones and twos from time to time, but full productions has ceased.

Randy_KB4QQJ

WA2WMR
Member
Posts: 10
Joined: Tue Nov 27, 2007 4:53 pm
Location: Northern Virginia
Contact:

Re: NT9K Pro Pump Status?

Post by WA2WMR » Mon Apr 09, 2012 7:01 pm

We may do some ones and twos from time to time, but full productions has ceased.
When asked, shall I refer them to you?

kb4qqj
Member
Posts: 197
Joined: Mon Oct 08, 2007 5:57 pm
Location: Burlington, NC FM06gd
Contact:

Re: NT9K Pro Pump Status?

Post by kb4qqj » Mon Apr 09, 2012 8:13 pm

Sure,
That will be fine. Thanks.
Randy_KB4QQJ

WA2WMR
Member
Posts: 10
Joined: Tue Nov 27, 2007 4:53 pm
Location: Northern Virginia
Contact:

PRO PUMP IS BACK

Post by WA2WMR » Sat Feb 08, 2014 11:56 pm

Hey guys, I just received this e-mail from KB4QQJ
Hi Lind,

I'm writing in regards to the post and request you had on the SKCC forum below:

[SNIP] I have one of the NT9K Pro Pump keys and absolutely love it. However, in a number of QSOs, when I have mentioned it, the response was that they wanted to get one but couldn't find it anywhere? The link from SKCC to the producer of the key seems to be gone.
Is this key still being produced? If so, by whom and how does one contact them? [SNIP]

We are going to do a limited run of the Pro-Pump. It will be a different base,(black crinkle coat) and the brass will be a satin finish with a sealant to prevent tarnishing and yellowing. It will have an LnR Key Concepts label but will be the same functioning key as the SKCC Club key.
If you still have people interested you can direct them to me to get on a "pre-list" or have them watch the web page at http://www.keyconcepts.us and wait for them to go on sale.

Hope all is well with you and you are still having fun with CW.

73 for now,
Randy_KB4QQJ

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest